1 / 4
Dahan — Spirit Island Tribal Hut Token (2-Colour, AMS Split-to-Parts) — zdjęcie 1
1 / 4

Dahan — Spirit Island Tribal Hut Token (2-Colour, AMS Split-to-Parts)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Spirit Island dahan tokens shaped like a Pacific-Islander tribal hut

Ocena
0 / 5
Polubienia
5
Pobrania
39
Wydruki
0
Wyświetlenia
126
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution

Dahan — Spirit Island tribal hut token

Replacement tokens for the dahan (Pacific-Islander villagers) in Spirit Island. Stylised as miniature tribal huts so each one reads at a glance as a village, not a wooden cube.

The hut is split into a roof half and a body half for 2-colour printing on a Bambu AMS.

Bundle

  • dahan_combined.stl (~27 MB) — 2 named solids (dahan_roof + dahan_body) in one ASCII STL. Bambu workflow: Import → right-click → Split to Parts → assign one filament per part. Coordinates locked, no manual alignment.

  • dahan_body.stl (~1.9 MB) — woven body half only, binary STL. Use this for a single-colour print, or for AMS users who want to assign filaments per-file instead of via Split-to-Parts.

  • dahan_roof.stl (~2.9 MB) — conical thatched roof half only, binary STL. Mates with the body at z = 8.25 mm.

Dimensions

  • Overall: Ø22 mm × 20 mm tall

  • Roof / body seam at z ≈ 8.25 mm (vertex-histogram peak — the eave where roof meets wall)

  • Each hut: ~6 g PLA at standard settings

Print

  • Orientation: flat on bed — the token sits upright with the body's flat bottom on the build plate.

  • Supports: none.

  • Layers: 0.2 mm.

  • Walls: 3.

  • Infill: 15 %.

  • Filament: ~6 g per hut.

  • Print time: ~25 min per hut.

The bundle ships 6 huts on the print bed (one for every dahan slot on the standard Spirit Island board / per-spirit setup). Tile them in Bambu Studio if you want fewer / more.

2-colour workflow (Bambu Studio + AMS)

  1. Import dahan_combined.stl.

  2. Right-click the model → Split to Parts. You will see two parts named dahan_roof and dahan_body.

  3. Assign filament 1 (e.g. thatch tan) to dahan_roof, filament 2 (e.g. wall brown) to dahan_body.

  4. Slice + print.

The seam at z = 8.25 mm is the natural eave line — the colour change lands exactly where the wall meets the overhang of the roof, so it reads as architecture, not as a slicer artefact.

Why ship the per-half STLs too?

  • No AMS? Print dahan_body.stl and dahan_roof.stl separately, then glue them at the seam. Or just print the body for a silhouette-only token.

  • Single-colour MMU users: drop dahan_combined.stl in as a multi-material model directly without Split-to-Parts.

  • Backup: the combined ASCII is ~5× larger than the binary halves — if your slicer balks at the size, the halves are the same mesh in a leaner format.

Compatibility

  • Designed for Spirit Island (any edition).

  • The token's footprint fits the dahan slots on the board with margin to spare; multiple huts cluster cleanly inside a single land.

  • Pairs nicely with my other Spirit Island prints (beast / fist / paw / mountain / wilds tokens + energy_counter + colonizer) — all in the same chibi visual language.

Tagi