Homeworld Fleet Command Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Organizer for the Homeworld Fleet Command Board Game.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 88
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Organizer for Homeworld Fleet Command.
Designed for the 'Versus' Grand Admiral pledge, which includes the full expansion as well as the Grey Kushan and Yellow Taiidan expansion fleets. It's intended to pack the primary fleets and all needed components in the Scaffold box and the alternate fleet components in the main game box.
Card cases were designed for card sleeves.
Poker sized cards (Units) used the Ultra Pro Matte sleeve (#84731)
Mini-European cards used the Gamegenic Mini-European Clear Matte Sleve (Code: Ruby)
Other sleeves may fit but haven't been tested.
Credit to @Antariz from the Modiphius Discord for the unit icons used on the Activation Token boxes. All other tokens came from the Modiphius asset pack.
This took a lot of time and a fair bit of trial and error. Feedback and input greatly appreciated!
Print Settings
I found printing with the default 0.2Q settings at 5% infill worked fine. Some adjustment may be needed fir your printer.
Multi-Material Printing
I designed many pieces to take advantage of multi-material printing and add color or labels. It's purely aesthetic and can be skipped if you don't have or don't want to do multi-material printing. All the G-Code is sliced for my MK3S+ with MMU3. Where multi-material isn't required, I sliced the print to use the correct color (usually white or black) from my MMU setup.
My MMU was loaded as follows.
White
Black
Blue (for Kushan player trays and lids)
Red (for Taiidan player trays and lids)
Spot Color as needed. Gray, Yellow, Orange or Brown, depending on the print.
Pieces to print.
Print one of all the pieces, except for the following:
Command Card Case - 2
Command Card Separator - 2
Dice Case - 2
The following pieces are identical except for color, so the same sliced print can be used if you're not using multi-color printing.
Player Tray + Lid
Player Cards Primary + Lid
Player Cards Alternate + Lid
Note I did not create separate token boxes for the series 2 and 4 activation tokens. That seemed like overkill.