Broomstick Repair Sleeve (19mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
fix a broken or weakened broomstick or mop handle with a 19mm diameter
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
3D Print Summary: Broomstick Repair Sleeve (13mm)
A quick, durable, and functional print designed to fix a broken or weakened broomstick with a 13mm diameter. Instead of throwing away a perfectly good broom, this sleeve reinforces the snap point, extending the life of your household tools.
Design Specifications
Target Diameter: 13mm (internal diameter of the sleeve)
Function: Structural reinforcement / repair joint
Print Time: Low to Moderate (depending on infill)
Material Usage: Low
Assembly Instructions
Clean the break: Sand down any jagged splinters or rough plastic edges on the broken 13mm stick sections.
Test fit: Slide the 3D-printed sleeve onto one side to check the tolerance. (If it's too tight, scale the print up by 1-2% in your slicer; if too loose, a layer of tape around the stick will help).
Secure it: Apply a strong epoxy, superglue, or polyurethane glue inside the sleeve and on the broken ends of the stick.
Cure: Slide the sleeve over the break, align the broomstick perfectly straight, and let the glue cure completely before using.