Worker Nightingale 2.0 N-strike stock adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use your N-stike stocks on Nightingale 2.0 without any hardware
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 393
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
2026-07-10 update:
Added a v3, which extended the locking slot a bit; hopefully it can fit more stocks.
2026-07-09 update:
Added a v2, which support using the original screw to screw-in from the other side, and have a tighter fit at the stock insert.
Installation
Option 1: with M3 x 40mm sunken screw
Unscrew the original screw.
Clip in the stock adapter.
Screw back using the M3 x 40mm sunken screw.
It would be the most solid option.
Option 2: no extra hardware (v2 and v3 only)
Unscrew the original screw.
Clip in the stock adapter.
Screw back using the original screw but on THE OTHER SIDE.
It would be slightly less solid than option1, but it still holds pretty well.