Waveshare 5inch Touch DSI Raspberry Case + Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for the waveshare 5inch touchscreen with a raspberry 4 and a super slow fan for cooling. I used this…
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 233
- Wydruki
- 3
- Wyświetlenia
- 2018
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
A case for the waveshare 5inch touchscreen with a raspberry 4 and a super slow fan for cooling.
I used this screen: https://www.amazon.de/gp/product/B08H23KB1G/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
There you can connect the raspberry within the backplate of the screen.
I had a Noctua 6025 fan lying around which I connect to a 5v pin of the raspberry, so it is absolute quiet.
I wanted a solution, where I may put the screen to an other place or hang it on the printer, so I made it modular and could design an other stand/hold for it later.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Category: 3D Printer Accessories