Modular Hex Planter Stand Using Standard Broomsticks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular Hex Planters stand. Can be made with as many plates you wish. Only need regular broomsticks & 3D printer!
- Ocena
- 0 / 5
- Polubienia
- 194
- Pobrania
- 171
- Wydruki
- 1
- Wyświetlenia
- 2160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It's a modular planter stand that is made only from 3D printed parts and standard broomsticks.
This stand can be adjusted and designed as you wish by simply printing more parts or adjusting the height.
For easy assembly I suggest to first insert the broomstick to the “Joint for Leg” (I used a rubber hammer) and only than insert it to the "Honey plate". In addition, I recomend to start the assembly from the center plate. Finally, to make the build more robust place the “construction” parts between the legs close to the floor.
To make it even more robust you can apply some glue between the joints and the plates, but note that by doing so you will loose the ability of rotating the plates.
To make exactly the desing I made you will need:
- 2 “Honey plate - Top"
- 1 “Honey plate - 1 Extension"
- 1 “Honey plate - 2 Extension"
- 11 “Joints for legs”
- 2 "Construction - No extensions"
- 1 “Construction - 2 Extensions”
- 1 “Construction - 1 Extension”
And of course some broomsticks. (I used 5 sticks 22.4mm diameter and 150 cm height)
I've also included STEP files, in case you want to make modifications, as broomsticks diameter can vary.
I made quick video to show how the table looks and how the plate rotate.
https://youtube.com/shorts/Hw_pAuvN4U0
In addition, you can find the planter on my images here:
https://www.printables.com/model/165672-patterned-planter