Cyberpunk access cardholder (office cardholder)

Want the source file? Grab it from cults: https://cults3d.com/en/3d-model/tool/cyberpunk-access-cardholder

A cyberpunk-themed access cardholder. Impress your colleagues, be the one with the coolest looking cardholder in your office. :)

I was not happy with my work cardholder breaking every year, so I designed my own one and because I quite like cyberpunk aesthetics, this is what I came up with.

The holder fits any card in the size of a standard credit card.

Note: The window on the back side is quite small, so if your workplace requires your access card to be visible, it might not be big enough. If you need that, you can ask me, and I'll design a custom version for you.

There are 2 versions with different codes on the back (they are actual codes, you can scan them if you know how :) )

Printing:
You can use the provided 3mf file or cut the stl yourself

• First, print the accent layers in the desired color, I used white

• Then, without removing them from the printbed, print the main case parts (make sure the alignment is perfect!)

Assembly:
You'll need 6 heat-set inserts and 6 m1.7 or m2 bolts for assembly.

There is some variation of sizes you can use, but within limits obviously
- length of the bolt: 3 - 3.2mm (not counting the cap)
- outer diameter of the insert: 1.8 - 2.2mm
- bolt diameter: 1.7 - 2mm
- bolt cap diameter (ideally flat cap): 3 - 3.5mm

• Press the inserts into the slots on the back body part

• Place the top body part on top the back one, screw 4 bolts from the top

• Put your access card in and screw the bottom 2 bolts

Post-processing:
You might want to add some accents in red on the sides and gold on the bottom connectors.

If you want to do that, I suggest using masking tape for choosing where to paint the accent and painting them with acrylic paint.
For a better look, coat with matte lacquer.