Centauri Carbon Panda Breath Mounting Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screw in place mounting solution for a BIQU Panda Breath in your Centauri Carbon
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 223
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I loved this little mount, but decided to remix it with tabs for some screws so you could mount everything in place on the side panel and not have to rely on magnets. I also went ahead and designed a little cover for the poop chute which allows you to seal the hole and route the power cable when used with an internal poop chute such as this one (https://www.printables.com/model/1333742-elegoo-centauri-carbon-internal-poop-bin-kit)
All you need is a drill with 3mm drill bit, 3mm screws, nuts, and washers. Only need to drill 3 holes in the left side panel.