PicoKey Slim Case - TENSTAR RP2350
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stripped-down, ultra-slim PicoKey case, tuned for the TENSTAR RP2350 mini board. Keeps the on-bo
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 106
- Wydruki
- 0
- Wyświetlenia
- 492
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v2.0
This is a remix of the excellent PicoKey Case (RP2350/RP2040) DIY YubiKey/Passkey. All credit for the original concept and base design goes to the author — I only adapted the top shell and trimmed everything I personally didn't need.
Tip — getting a solid USB-A fit
Because the PCB is thinner without the USB shroud, some host USB-A ports won't grip the TENSTAR RP2350 firmly enough to make reliable contact. My fix: three layers of standard electrical insulation tape on the back of the PCB. It bulks the board back up to the right thickness for a snug fit, and — bonus — by using different tape colors, you can visually distinguish multiple keys at a glance (handy if, like me, you own several).
Printing notes
Layer height: 0.10 mm works great.
No supports needed.
Any rigid filament is fine; PETG or ABS recommended if you carry it on you (PLA gets soft in a hot pocket or car).