Toothbrush Travel Case — Print-in-Place Hinged Box with Snap Latch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
200 × 25 × 25 mm hinged toothbrush travel case. Single print-in-place — body, lid, hinge, and front snap latch all come
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
A print-in-place toothbrush travel case — one print, no assembly. Body, lid, integrated piano hinge, and front snap latch all come off the bed as a single assembled piece. After printing, fold the lid 90° forward over the body; the thumb tab on the lid front clicks down into the catch notch on the body's front wall.
⚠ Print with supports. This is a print-in-place hinge with the lid standing 90° UP behind the body in print orientation — the hinge knuckles and bracket undersides need supports underneath. Tree supports work well; default support settings in Bambu Studio / OrcaSlicer are fine. Without supports the hinge will not print cleanly.
Heads-up: slightly clunky. This is V3 of the design — walls and floor were bumped up for sturdiness. The case is functional and the latch is satisfying, but it's noticeably bulkier than a production travel case and the closed silhouette is more "toolbox" than "elegant". If you want something sleeker, consider this a v1 you can scale down in the SCAD.
Closed external dimensions: 200 × 25.8 × ~50 mm (with lid folded). Internal cavity ~196.8 × 21.8 × 21.4 mm fits one standard manual toothbrush (~190 × 20 × 20 mm) with ~1.5 mm clearance on every axis.
Hinge geometry (V7 canonical, verified in other models):
Pin Ø2.5 mm captive
Bore Ø2.9 mm (0.20 mm radial clearance — slip-fit)
Knuckle Ø5.5 mm, 9 alternating segments (body owns 0,2,4,6,8 ; lid 1,3,5,7)
0.15 mm axial clearance between knuckles
Snap latch: front-center thumb tab on the lid, 30 mm wide, flexes against a catch notch (1.7 mm depth) cut into the body's front wall. Click is satisfying; open by pressing the thumb tab upward.
Print settings:
Layer height 0.20 mm
Wall count 3 (walls are 2.0 mm)
Infill 15–20 %, gyroid or grid
Supports ON — tree supports recommended
Print orientation: as exported (lid stands 90° UP, vertical)
PLA or PETG; ~50 g filament total
After printing:
Carefully remove tree supports — work them out of the hinge knuckle gaps and from under the lid brackets.
First open is a touch stiff (layer adhesion in the hinge); rock the lid back and forth a few times to free it.
Fold lid 90° forward over the body — thumb tab clicks home.
Files:
toothbrush_case.scad— parametric source (all dims at top)toothbrush_case.stl— single print-in-place STL
OpenSCAD source included — tweak box_x / box_y / box_z at the top of the file to fit other brushes or small tools.
