1 / 3
Profitec GO 58mm Portafilter Stand Tamper Station — zdjęcie 1
1 / 3

Profitec GO 58mm Portafilter Stand Tamper Station

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Custom Portafilter Stand & Tamping Station for Profitec GO 58mm Basket

Ocena
0 / 5
Polubienia
3
Pobrania
28
Wydruki
0
Wyświetlenia
143
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial

Dedicated Portafilter Stand and Tamping Station for the Profitec GO.
Key Features:

  • Perfect Fit: Tailored specifically to accommodate the Profitec GO portafilter geometry with a 58mm basket.

  • Rock-Solid Tamping: Provides a level and sturdy base for consistent, clean tamping.

  • Anti-Slip Base: The bottom features dedicated recessed slots designed to fit 12mm diameter silicone rubber feet/pads to keep the station firmly in place while tamping.

  • Material & Heat Resistance: The original model was printed in ABS to safely withstand the high temperatures of a hot portafilter straight out of the grouphead without warping or degrading over time.

Print Settings:

  • Supports: None (Designed to print cleanly without supports).

  • Material: ABS (recommended for heat resistance) or PETG.

  • Infill / Walls: Recommend 3-4 perimeters and 25%+ infill for maximum structural strength during tamping.

Tagi