Ventilation Pipe Mount IKEALack Enclosure 80mm Fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
90° Angled Mount to connect a Ventilation Pipe on your IKEA LACK Enclosure. This Model is for 80mm Fans
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 822
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
This is my first ever Upload of a Model so if something is wrong/false, I'm open for feedback :)
Printed on MK3s+ with Prusament Silver PLA
This 90° Angled Mount is used to connect a Ventilation Pipe to your IKEA LACK Enclosure. Its suitable for 80mm Fans and the Ventilation Pipe I used has a Diameter of ~32mm so the mount itself is ~31.5mm in Diameter.
The Angle of which the Pipe is connected can be changed (different than in Picture) since its made up of 3 Pieces so its more Printable. They fit together and with the help of a few drops of Glue they will hold together nicely.
You might need supports for Part_3_Pipe_Mount and Extra_Pipe_Support.