Gridfinity Holder for Large Format LTT CPU Holders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the bin for my Large Format CPU holders.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the bin for my Large Format CPU holders. I've decided to start with 2x2, as I personally don't have a ton of larger CPUs. Like the standard size bins, there are two versions: one with magnets and one without.
They can hold between 9 and 10 CPUs each, although 10 was pretty tight. Let me know if you need a larger bin though and I'll make you one!
If you're looking for the holders to fill this with, check out my Master List here!
The standard size holder bins can be found here!
The magnets version needs up to 16 6x2mm magnets.
Printed in Hobby Lobby PLA White