Modified to make it easy to remove the bolts from the bins
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modification to AWSW's original bolt sorter design now allowing you to remove the bolts once sorted.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 92
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my very first post so suggestions for doing this better are welcome.
I added the ridge as a separate file in case you have trouble getting this to fit. This file [Slide with Ridge] should be printed separately at 0.12 layers in order to print the ridge. The ridge is at 0.36 so a 0.12 layer height will give you three layers to make the ridge, the ridge has a 45 degree angle on each end for ease of movement.
I also added inserts to assist with the switching of the plates, this way the bolts do not destroy the case with repetitive insertion and removal.
WARNING - You will need to use supports for the case files (sorry), this is required to handle the overhang of the upper capture for the slide plate.