iBasso PB6 Macaw Sleeve
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
Just a TPU sleeve for the iBasso Audio PB6 Macaw portable amp. I wanted something that breathed better than the leather case option from iBasso. Should protect from minor bangs and scraps. If you drop it from 4 feet onto concert I don't think anything would save it so...
Print in your favorite TPU and settings. Use paint on supports top edge of the windows. Use standard supports they come out pretty good.
Set your Top contact Z Distance or equiv to 0.3 and all the supports should come out clean after it's fully cooled.
OR if you your have a well dialed in printer you can lay it on its back and print with tree supports from the build plate only. This makes a lot of supports so it takes a long time to print but I think it turns out nicer in the end. Again if you have your Z Distance set to 0.25 - 0.3 the supports should pull right out when cooled.