Graduate Male Flexi + Keychain | Multicolor 3D Printing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print-in-place Flexible No Supports Multicolor Multicolor 3MF file + STL File available
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Graduate Male Flexible Figure + Keychain
Print-in-place
Flexible
No Supports
Multicolor
Multicolor 3MF file + STL File available
SELLING RIGHTS AND COPYRIGHT To legally sell printed versions of AmazeMakerZ models, you must obtain a Commercial License by subscribing to our Patreon.
All AmazeMakerZ designs are protected under copyright law. The digital files may not be sold, shared, or distributed in any form.
Join our community and unlock selling rights along with exclusive monthly designs:
https://www.patreon.com/cw/AmazeMakerz
https://www.myminifactory.com/users/AmazeMakerz
Thank you!
3D printing settings
Layer Height: 0.20 (Use Variable layer height on the peaks if you have the time)
Walls: 3
Infill: 15% gyroid
Brim: No
Supports: No
Arc fitting: On
Slow down: Outer walls
Feel free to adjust the settings to your convenience.
A good first layer is mandatory for the print to succeed. Be sure your printer is calibrated and you have good bed adhesion.
For smaller prints some articulations may not work as intended. This model has gone through several printings to ensure it is strong and easy to print.