BTT HDMI 5 Display Voron Mount Extended for Clicky Clacky Door and a spot to put the Coolgear USB Hub
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's a display mount, extended to work with the Clicky Clacky Door Mod. I also added a mount for the USBG-4U3MLR2 HUB
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I took the BTT HDMI 5 Display mount by DET-Man and added mounting screws for the Coolgear (USBG-4U3MLR2) Industrial USB 3 Hub. It REQUIRES printing with Support. This was just a quick edit making mounting holes and cutting into the original model to make space, so since it's a one-off, it's pretty rough.
Please get the other files from the original model (this is just the display mount)
Honestly, I bought the Coolgear because it was a powered USB Hub (handy for powering the BTT HDMI 5 Display, webcams, etc. without relying on the Pi) because it had a built-in DIN Mount and could be powered by the 24v PSU. It is unfortunately too tall even with right-angle connectors so I needed some other place to mount it and noticed there was space under my display. Thus 1 quick edit with Microsoft 3D Builder and there you go. It does require you to angle the USB Hub to put it in, but then it goes in straight. Also, you have to use 2 heatset inserts for the screw holes.