Stand for LEGO Y-Wing 75172
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand to make the fighter more visible.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
What?
This is a stand to shift up and tilt a propietary-danish-brick-brand Y-Wing 75172. The height in its highest point is below 15cm (5,9 inches) and tilts it 40º.
Why?
I put all my LEGOs on shelves and I realized that most of my Star Wars fighters were almost invisible. I was able to find a few generic/general-purpose stands to shift them up and tilt them a bit over, so they can be seen better, however, I was unable to find something to make my Y-Wing more visible, as its weight distribution makes it hard to use a generic stand.
After printing a few of these stands from @Pegasus3D (links to Makerworld) for other fighters I liked the idea, so I designed something similar with a slightly bigger angle (not sure what's the angle on Pegasus' model, mine is 40º). A 2x2 doesn't fit where I thought it was the best hole to hold it, so I made something that gets into that space firmly enough to keep the fighter steady.
Printing the model
The angle is 40º so it shouldn't be an issue to print it without any supports. I printed it with eSUN PETG with a 7% gyroid filling and no supports and it came out really great. The stand goes in with a bit of pressure, ideal to keep the fighter in place.
Considerations
Due to its asymetric nature the fighter is not reversible: it'll only display the fighter in one direction. The model is set to place the fighter facing to the right, mirror the object if you want the fighter to look to the left.
I've added the STEP file in case someone finds it useful.
This is my first “complex” 3D design, any feedback is welcome!