Guitar Expression Foot Pedal Pinion Gear Replacement Part
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement pinion gear for a guitar expression pedal
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a replacement print for an expression pedal pinion gear. This was made for a Proel PVP32 expression pedal but this print is applicable to most expression pedals, especially those that use the same type of potentiometers used in guitars.
It is important that after installation, you add a bit of grease to the rack and new pinion before closing the enclosure.
Adhesion: Yes - Brim
Support: No
Material: PETG
Infill: 100%, Linear/ Rectilinear
Resolution: 0.1mm and 0.2mm
If you own a Bambu Lab printer, a Bambu Studio Settings file is available: "Exp Pedal Pinion Gear (Bambu Studio Settings).3mf"
