1 / 18
92mm Case Fan Filter Cartridge Magazine w/ Cartridges — zdjęcie 1
1 / 18

92mm Case Fan Filter Cartridge Magazine w/ Cartridges

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed to be used with Timeplast's Desiccant Filament.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
28
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

I designed this case fan adapter to fit a 92mm fan that I had lying around. It is meant to hold printable desiccant cartridges.

I printed the cartridges on this filament: https://www.timeplast.com/store/p/desiccant-filament 

The magazine was printed on TPU for it's heat resistance and durability. 

Cartridge A and B are meant to only fit one way so if it feels snug swap the cartridge 90 degrees and try it again. The cartridges are meant to layer over one another to give more surface area for air to flow in and around. I left the stringing on the prints to add surface area on top of that. If desired, stringing can easily be removed with a few "coats" of "sanding" with a wet paper towel. The material is water soluble so it is easily done. 

For a quick demonstration, I used the device to make a rudimentary filament dryer.

Tagi