Stackfinity - Handles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stackfinity is a set of Gridfinity objects that help with stacking Gridfinity Bins on bases whilst remaining stable.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 297
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Stackfinity Handle Collection
Gridfinity is a great storage solution spec from the mind of Zac Freedman of Voidstar Labs.
One shortcoming (amazingly) that I found in the wider community was the ability to stack Gridfinity whilst remaining easily accessible when storing a large number of bins.
Stackfinity is about storing Gridfinity Bins onto bases that can then be stacked on top of each other, with sufficient support so as to not randomly disassemble everywhere. Support strength comes from a combination of a more rigid set of stacking bases as using your chosen Gridfintiy bin that matches the height of these handles.
If you like what you see and do makes, I'd love to see how this project evolves over time, so please share your makes for others to see!
Stackfinity consists of the following Models Sets
Stackfinity - Home (Overview)
Stackfinity - Handles - This Page
Stackfinity - Bases - Single - Individual bases for One-Off base prints
Stackfinity - Bases - Stack - Stacked Bases for printing multiple bases at once (Coming Soon).
Stackfinity - Bases - Wire Shelves - Special Deep Bases that can be modified for Wire Racks (e.g. IKEA)
Stackfinity - Tools - Life improvement tools to make mass assembly easier.
Stackfinity - Labels - Edge on Labels for Identifying what's on the Stack Shelf (Coming Soon).
Stackfinity - <More to come in time!>
Printing and Assembly
Choose your desired handle Size from below. This should match your selected Base from one of the Base Projects linked above.
Print 2 matching handles
(Optional) Print the Stackfinity - Nut Tool if you want to make it easier to assemble your bases (Linked Tools Project above)
Screw the Handles to the base using M3x12mm (or longer) with as many pairs of screws you feel is needed for your current shelf.
Downloading Handles
Handles come if the following Gridfinity Heights (in Gridfinity Units)
3, 4, 5, 6, 7, 8, 9 - Units for more shallow bins
12, 15, 18, 20, 24, 30, 36 - For deeper bin needs
Handles are organized into groups for various bin Depths, where depth is the side handle depth of each printed "shelf" and is measured in standard Gridfinity Bin size of 42mm.
Handle Depths come in the following
1, 2, 3, 4, 5, 67 and 8 Bin Units (42mm)