Tronxy X5SA PRO Front Panel with Corner Stiffeners integrated
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Front Lower panel for my heavily modded Tronxy X5SA PRO
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 88
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Front Panel & Corner Stiffeners for Tronxy X5SA PRO / "Mantis-Bot"
Hello everyone!
This is a custom-designed front panel modification for the Tronxy X5SA PRO (specifically tailored for the "Mantis-Bot" conversion). It features integrated corner stiffeners on the internal side to improve frame rigidity.
📌 Compatibility: It should also fit the non-PRO versions of the Tronxy X5SA without any issues.
📂 File Organization & STEP File Included
To make things as clean as possible, all files are neatly organized into folders based on their design. Additionally, I have included the original .STP / STEP file, so you can easily modify or customize the design to fit your specific needs!
Available Versions
I have designed several variants. All of them are available in two frame styles: Squared or with a Front Chamfer.
Blank / Smooth Version: A clean slate. You can print it as-is or easily customize it with your own text or logo in your slicer/CAD.
Mantis Logo (Thin): Sleek and subtle branding.
Mantis Logo (Bold): A more prominent, striking version of the logo.
Hexagon Pattern: A stylish, geometric mesh design.
🔩 Hardware Required
For assembly and mounting onto the v-slot profiles, you will need:
A few M3 and M4 bolts (screws)
Matching M3 and M4 T-Nuts for the aluminum extrusions
⚠ IMPORTANT PRINT NOTE (Left & Right Match)
When preparing your plates, please make sure to print the correct matching pairs for the left and right sides!
Ensure you print either both Left and Right SQUARED (Non-Chamfer) versions,
OR both Left and Right CHAMFER versions. Don't mix them up on the same machine!
Print Settings & Material Recommendations
Supports: Not required (optimized for clean printing without supports).
Enclosed Chambers: If you plan to run your printer with a heated enclosure, I highly recommend using PETG at a minimum, or ideally ABS or ASA to withstand the ambient heat.
My Personal Setup:
Black parts: Elegoo ABS
Red logo: Azurefilm ABS
Happy printing! If you like this model, please post your makes and leave a review!