1 / 4
Sliding plinth clip for PVC and aluminum kickboards — zdjęcie 1
1 / 4

Sliding plinth clip for PVC and aluminum kickboards

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Sliding plinth clip for PVC and aluminum kickboards

Ocena
0 / 5
Polubienia
3
Pobrania
8
Wydruki
0
Wyświetlenia
58
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

This is a custom-designed sliding clip for mounting PVC and aluminum kitchen plinths onto standard 30 mm cabinet legs. The model is optimized for FDM 3D printing and provides a good balance between flexibility and strength, ensuring a secure snap-fit without breaking.

The clip is designed with slightly flexible arms to allow repeated installation and removal. The sliding mounting system makes it compatible with different plinth types and allows minor positional adjustment during installation.

🔧 Print settings used

  • Layer height: 0.2 mm

  • Perimeters (walls): 3 (minimum)

  • Top layers: 5

  • Bottom layers: 4

  • Infill: 25% (grid pattern)

  • Supports: Yes (organic supports recommended)

  • Support overhang angle: 40°

✅ Notes

  • Designed to fit 30 mm diameter legs

  • Printed successfully in standard PLA (PETG recommended for higher durability)

  • Provides sufficient flexibility without cracking

  • No raft required