Side Panel for Commodore 64 Ultimate w/logo and recessed switches
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Side panel for the Commodore 64 Ultimate with Menu, Reset, and Freeze buttons plus illuminated LOGO
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 328
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Models with and without SD extender slot. This is a multi-color model. I printed in black, blue, red, and white. It consists of 5 parts: the main body (black), the logo 's "C" (blue), the upper flag (blue ), the lower flag (red), and a diffuser ring (white) to help even illumination. Wire the LED to the LED2 connector on the C64U main board.
Add manual tree supports from bed only to the unsupported edges of LED holder. If your slicer supports it, use "Arachne" and "detect thin walls" in order to get the best results on the C= logo.
Pause print at 5.2mm to insert nuts for the switches.
I have not printed the version with SD extender housing since I don't have one. But I suspect the dimensions to be accurate. If not, please let me know.
Fusion360 design files are included.
I used these 7mm switches: https://www.amazon.com/dp/B07YDHP3HS?th=1
It might be possible to modify the design such that the switches simply screw into the print rather than embedding the nuts, but I leave that as an exercise for the reader.