Hardboard or Clear Plastic Box Corner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Hardboard or Clear Plastic Box Corner. I made this because I needed to make a box to protect my 3d printer from…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 92
- Wydruki
- 0
- Wyświetlenia
- 1180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
The Hardboard or Clear Plastic Box Corner.
I made this because I needed to make a box to protect my 3d printer from sawdust in my workshop.
Print 8 of these and with some 3/16" hardboard or clear plastic from your local home center, you can build a 5 sided box. These corners build the 4 walls and you can lay a panel on top to "close" the box.
Edit: Added another corner design. This one has two 1/4 inch holes so a Clevis Pin (1 3/4") and R-clip can be used to secure the boards in place.
Print Settings
Printer:
Wanhao Duplicator i3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
How I Designed This
Designed in Skethup
Category: Containers