Benro B1 Tripod - Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
No support model designed to mount a Benro B1 Tripod to the wall for easy storage and access.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
Designed for the Benro B1 tripod. I got many years ago used so not sure if this tripod is still for sale or if will work with all models of the tripod.
Not the most elegant solution because requires the tripod to be inserted at a specific angle and with the center tube slightly extended but works well enough I didn't feel the need to reprint.
Printed with polyterra pla blue. 5 outlines. 30% gyroid infill. Sliced on orca slicer wave overhangs fork. No support or wave overhangs required. Took about 4 hours to print on my Ender 3 Neo.
Designed for a 2 inch deck screw going into wall stud. Predrilled hole then went slow with the screw as to not put too crack the model.