1 / 7
The Lord of the Rings Chess: Mordor | Middle Earth — zdjęcie 1
1 / 7

The Lord of the Rings Chess: Mordor | Middle Earth

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Behold! A special chess set for all my fellow LOTR enjoyers.

Ocena
0 / 5
Polubienia
18
Pobrania
76
Wydruki
0
Wyświetlenia
694
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution — Noncommercial

After learning my fair share of Blender, I came to realize the powerful yet reachable potential I could grasp. So forth, I went on and created an entire chess set of Mordor Architecture-Themed Pieces!

After lots of dedication and many tests later, I have curated what I consider to be my finest work yet! Each piece took many hours to design, and some took weeks of meticulous work, so please Enjoy! Some pictures show the progression I have made for every piece, giving you insight in my work.

Sizes

Blender is still somewhat foreign to me, so the scales are very off. Don't worry, since I will give you the sizes I recommend and used for my current pieces.

  • The King Height is 97 mm

  • The Bishop Height is 57 mm

  • The Knight Height is 62 mm

The rest of the Chess pieces were made with intentional measurements in OnShape and are just fine as they are, but you may scale my pieces based on your own board sizes. (my board squares were 1.5*1.5 inches)

Alternative King Piece

You will notice that my simpler Barad-Dur model I made a ways back was the original chess piece idea. if you would rather have that piece, you can go here, or scroll through my models.

Thank you for downloading this set. I greatly appreciate it if you print this and show it. It took me so much time, and I considered making it a premium commodity, but I decided otherwise so everyone can enjoy it. Thanks Again!

King, Bishop, and Knight were made in Blender.

Pawn, Queen, & Rook were made in OnShape.

Photos by me. Chess Pieces were printed on Bambulab A1. Chessboard squares were 1.5 * 1.5 in on my chessboard for size reference. (1.5 in is roughly 38 mm)

Tagi