20 series extrusion allignment tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
simple tool for aligning 20 series aluminum extrusions
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I designed this part because I am making my own ender 3 corexy conversion similar to duender, one of the steps I needed was to drill holes at the exact same location on the extrusion, I designed this tool to help me get the extrusions as equal as possible to be able to take the duty of any clamping that would have most likely been used for this task.
PRINT SETTINGS -
3 walls
15% gyroid
0.2mm layer height
USAGE -
make sure your extrusions are tapped
insert a m5x15 screw into the hole on the part
insert the extrusion above the screw
tighten down the extrusion
COMPATIBILTY -
compatible with 2020, 2040. versions for 2060 and 2080 coming soon.
extrusions MUST be tapped to m5 on at least one end.