1 / 4
UK Dry lining mount for UniFi PoE Smart Chime — zdjęcie 1
1 / 4

UK Dry lining mount for UniFi PoE Smart Chime

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount for the UniFi PoE Chime to fix ait in to a UK standard-size hole in a plasterboard wall

Ocena
0 / 5
Polubienia
0
Pobrania
16
Wydruki
0
Wyświetlenia
117
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Mount for the UniFi PoE Chime to fix ait in to a UK standard-size hole in a plasterboard wall, similar to any other dry lining mount.  The cover is designed to fit in with other sockets, light switches or communications mounts.

It requires a depth of at least 50mm and clearance for the cable behind too.  The chime is held using its built-in twist lock, the cover is held on just by friction.

Printed best with snug support.

Requires 2x M3 screws which are at least 35mm in length, and 2x M3 4.5OD threaded inserts (length of 3-5mm should work fine).

The threaded inserts should be melted in to the holes in the tabs, then those slide in to the main body - held in place with the M3 screws.  Ensure these are the correct way around so that they fold away in to the main body when fully extended, and spin out to grip the plasterboard / drywall as they are tightened.

Tagi