1 / 5
Systainer S Inlay Parkside Hollow Wall Anchor Setting Tool / Hohlraumdübelzange
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tanos / Festool Inlay Systainer S Inlay for Parkside Hollow Wall Anchor Setting Tool
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Systainer S Inlay Parkside Hollow Wall Anchor Setting Tool
This is an Inlay for the Systainer S or Mini-Systainer T-Loc(old version). The Inlay is made for a Hollow Wall Anchor Setting Tool / Hohlraumdübelzange. For the storige use Plastic containers Box in my case 2x 75x100 42,5
Printing
The Modells are designt with following printing parameters:
Nozzle: 0,6mm Recommended
Layer Height: 0,32mm
Peremeters: 2
Supports: None
Infill: 10%
Brim: Yes
Solid Bottom layers: 0
Compatible with:
Systainer S 76
Mini Systainer T-Loc I