SkewBow quality of life changes.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some minor modifications I made to my SkewBow to fit me better.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Modified the tip to add the Crossbow's original bow arm mount as decoration. I did use 2 m3x8 screws to mount the colored tip. This does reduce access to the front nut.
Strengthened the front stock section, I had the part break on me, but it may not be necessary. I might have left it primed for too long without realizing.
Added a short picatinny rail to the scope, so I could add faux red dot sight.
Lengthened the buttpad to increase length of pull. I also printed this in TPU and is quite comfortable.
The only files that require support and the tip end and the picatinny rail.