Toolbox II for the Proxxon FD 150/E
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A box for all the accessories of the Proxxon FD 150/E miniature lathe. Slides on the chip tray.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I already said that I love my tiny Proxxon FD150/E. Did I? Yes I did: https://www.printables.com/model/1700549-toolbox-for-the-proxxon-fd-150e
So I bought myself a chip tray for the machine. And I quickly learned that the tool boxes I made before do not fit anymore. The tall one is too tall at all. The lower one fits, but the lid doesn't anymore. Sure, easy to reduces height. But there isn't then enough space in the lower one for all the tools I like to store.
So, here is the next version. Much larger, which helps to get the tools out. Even the drill chuck can now put in while the spindle is still attached (it get's loose not so easy anyway).
The top slide slides under the box, so now worries here.
Printed it with the flat right side wall down, so I got a nice surface. Yes, it needs a lot of support material then. And the inner left side does not look very well. One more reason, besides the chips, to put the lid on.
0.2mm is fine, PETG preferred, PLA should work (not tested).
Have fun with it!