1 / 7
220 * 220 Heatbed Stress Relief (I used this for my Anet A8) — zdjęcie 1
1 / 7

220 * 220 Heatbed Stress Relief (I used this for my Anet A8)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My previous connection broke so I bought a new heated bed and printed a stress-relief.

Ocena
0 / 5
Polubienia
1
Pobrania
4
Wydruki
0
Wyświetlenia
29
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

My previous connection broke so I bought a new heated bed and printed a stress-relief. Yes, I know, The "right" thing to do is solder the heatbed. But not everybody has the expertise / tools to do such a thing since the heatbed basically acts as a huge heatsink.

The model connects to the bed without any external hardware / modifications and is easily removable. I also left a hole for the LED so you can easily tell if the heatbed is on.

The One-Part model needs 2 cable ties (to hold the connector), 2 m3 bolts and 2 m3 nuts (to hold the cables).

The Two-Part model needs 2 cable ties (to hold the connector), 5 m3 bolts and 5 m3 nuts (2 of each to hold the cables & 3 of each to connect the parts).

The cables are kept in place via a clamping mechanism (using the clamp.stl piece and the holes in the main body). Be careful not to clamp too strong and ruin the cables! I used only my fingers to screw it in place and it feels great.

In my pictures I used the Two-Part model because I thought it would apply more pressure to hold the soldered connection in place, but in retrospective I don't think it really matters. Also, the big One-Part body easily fits the build area.

The printed part feels great and sturdy!

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

100%

Filament: Esun PLA Black

Notes:

I printed this on my ender but you can print it on the anet as well.

Category: 3D Printer Parts

Tagi