1 / 5
Felting tool - Holder for single felting needle (with integrated storage) — zdjęcie 1
1 / 5

Felting tool - Holder for single felting needle (with integrated storage)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple holder for a single felting needle with a push-in plug. You can put the needle in backwards for storage.

Ocena
0 / 5
Polubienia
9
Pobrania
57
Wydruki
0
Wyświetlenia
151
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

Felting tool - Holder for single felting needle (with integrated storage)

This is a simple felting needle holder for one needle. It has a plug that secures the needle.

You can reverse the needle when not in use -- this protects the needle from being bent and also it protects you from the needle :)

Dimensions

The holder has a height of 8cm and a diameter of 1.7cm (at the widest point).

The needles I used have the following dimensions:

Total length: 85.5mm
Shank diameter: 1.85mm
Crank length (the horizontal part on top, including shank): 6.5mm

Printing

Printed with adaptive layer height to make the top of the holder smooth.

I printed this on Bambu's Cool Plate SuperTack, so I didn't need a brim for this. With different build plates/printers, you might want to add one though.

Tagi