1 / 2
Ransilio Silvia Solenoid Valve Spout
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spout for the Ransilio Silvia espresso machines to reduce splatter when backflushing
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I've made this spout for the Ransilio Silvia Solenoid valve to reduce the splatter when backflushing. With the original spout, the water can get onto the main frame of the machine, which can make it rust (as you can see from the images). The model should fit most filament brands event if they're not perfectly calibrated, as the spout gets increasingly tighter when mounted.
The model is made to be printed without support and is made for 3 walls when printing everything with 0.4 mm wall thickness.
