RGB Neon Butterfly Sign (WS2812B / WLED)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A beautiful DIY LED neon butterfly sign. Designed for 5V WS2812B RGB strips. Includes wall mounts and a custom diffuser!
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- GNU General Public License v3.0
Add a vibrant pop of color to your room with this DIY RGB Neon Butterfly sign! This model is designed to house a standard addressable LED strip and includes a custom-fitting diffuser to create a smooth, continuous "neon" look without harsh hotspots.
Perfect as a wall decoration, night light, or background piece for your setup. I've also included the original Fusion 360 (.f3d) file in case you want to remix or adjust tolerances for your specific LED strips.
Files Included & Assembly:
butterfly Main Body: The main channel to route and stick your LED strip.
butterfly_Diffusor: Snaps or glues over the main body to diffuse the light perfectly.
butterfly_Screw Mount option 2: The mounting block to securely attach the sign to your wall. Note: This part needs to be attached to the back of the Main Body using super glue.
butterfly Cable hider bottom: Keeps the wiring neat and tidy where the cable exits the sign. Note: This part also needs to be attached to the Main Body using super glue.
Led butterfly v2.f3d: Source file for easy customization.
Hardware Required:
LED Strip: Standard 5V WS2812B addressable RGB LED strip.
Controller: A 5V RGB controller or a WLED setup (e.g., using an ESP8266 or ESP32).
Power Supply: Matching 5V power supply (ensure it provides enough amps for your length of LED strip).
Super Glue (CA Glue): Required to attach the screw mount and the cable hider to the main body.
Recommended Print Settings:
Main Body / Mounts / Cable Hider: Print in opaque PLA, PETG, or ABS (Black or White) to prevent light bleeding through the back and sides.
Diffuser: Must be printed in White, Clear, or Translucent PLA/PETG to allow the RGB colors to pass through and blend smoothly.
Layer Height: 0.2mm works perfectly.
Infill: 15% - 20%.
Supports: No supports needed if all parts are oriented flat on the build plate.