Geeetech/Giantarm filament spool Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed a lamp to use an empty Geeetech or Giantarm filament spool.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
Disclaimer:
Only the first picture, aka the cover photo, is AI edited. The rest are real-life photos of the prints.
It also appears that GEEETECH has changed their spool design and I have gotten confirmation that they are in fact in the process of changing to a new type of spool and you probably will receive the new type if you order today. I will try to see if I can adapt the design to the new spool later or something.
This lamp is designed to be very easy to mount. You only need to print:
1 Base
1 Lock
1 Optional Shade
Shade Types
Closed shades require the lock to be removed before changing the shade.
Open shades can simply be pulled off and swapped. when you have all your parts, use an optional
Installation
No drilling is needed.
Simply:
Pull the cable through the existing holes.
Line up the cable with one of the recessed channels in the model.
Place the spool over the stand.
Lighting
For lighting, you can use an optional LED strip.
I used:
A 5V LED strip
Solder-free USB cable clips
I personally did not add an on/off switch, but you will probably want to include one.
One of the nice things about using a USB-powered setup is that the lamp becomes very portable. It can be powered by:
A power bank
A PC USB port
A regular USB wall adapter
This only applies if you chose to use 5V LED strips, of course.
Optional Finishing
I painted the inside silver to increase light reflection, but this is completely optional.
Once the LED strip is installed, the inside is barely visible anyway.