Pannier Riser for BMW F650GS Single
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little block to deal with BMW's uneven pannier mounts on the F650GS Single
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a little insert for the BMW expandable pannier mounting system for the F650GS. I have never been able to get the support bars balanced properly and one pannier or the other would always be hanging loose and banging around even with the top bolt all the way down. I finally realized that I have a 3D printer and CAD, so I can make a little insert! Here it is.
The pictures show the insert inserted under the pannier hook. You need two per bag. The insert has a relief for the round rubber foot on the bag hook so it stays in place. It wraps around the support bar quite a bit so it won't drop off if it gets loose. But really, you could just print a new one if it did, right?
Anyway, if you also ride the best motorcycle ever built and your boxes are loose, here is the solution!
Print with TPU, 2 walls, 10% infill. Use supports to keep the recess nice and round.