Gaggia Classic - Gaggimate Top Panel Screen Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement solution for mounting your Gaggimate screen on the top of the Gaggia Classic.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 88
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
A replacement solution for mounting your Gaggimate screen on the top of the Gaggia Classic.
I always wanted a screen that sat fully on top of the Gaggia Classic, but I also realized you'd need to butcher the stock top plate. So I decided to come up with a design that completely replaced the top plate and try and make it look like an elegant and modern-ish design.
I'm not a great 3D designer, so my design is made entirely out of slicing objects, and as such I'm leaving a lot of that in the designs for people to modify or tweak for their own requirement.
This is still a work in progress, so it may continue to be revised, but you are welcome to give feedback or again add/remove what you do or don't need.
(For example, most recent revision now has magnet cut outs for 5x1.5mm magnets)
All screw holes should be for 3mm screws, I suggest you pre tap any screw holes with a screw before putting them together to make it easier.