Cinesplore Chopped Ducts w/ Tight Fit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Chopped ducts for the Cinesplore. I print them out of Hatchbox PLA and I'm satisfied with the durability but whatever…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Chopped ducts for the Cinesplore. I print them out of Hatchbox PLA and I'm satisfied with the durability but whatever works. Armadillo is also a good option. Just keep in mind the tolerances are very tight and if it flexes when you hit something it can possibly jam up the propeller. Print upside-down with no supports. If it doesn't stick for some reason on your printer use a brim.
These were designed for Gemfan D76 propellers on FPVCycle 2203 motors.
Print Settings
Printer:
Artillery Sidewinder X1
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100%
Filament:
Hatchbox PLA
Black
Category: R/C Vehicles