DIN Mount for BD33 22mm Knob Switch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting bracket for the BD33 button for DIN rail mounting.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed for my wife. Unfortunately, the original mounts for this type of button often break under the pressure of curious students :P , so here’s an approach using an easy-to-print 3D model.
Ultimately, the part is intended to be printed on its side, as shown in the photo (in the case of PETG with supports). In terms of durability, the part that bends was also designed for PETG—so I don’t know how it will turn out if someone prints it with PLA.
First, the metal button body goes inside, then it’s screwed together with the switch, and finally the NO/NC contacts are added. There are holes on the side for any adjustments or disassembly of the button using a screwdriver.
* Layer height 0.2. Support (tree) manually placed only on the top base