MMU3 FINDA Cable Strain Relief - Low Profile
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A low profile MMU3 FINDA cable strain relief.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 33
- Wydruki
- 2
- Wyświetlenia
- 121
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A low profile strain relief for your MMU3 FINDA cable. Comes in two varieties:
Strain-relief with straightener feature. See red caption in photo. Can only be used with the FINDA cable routing around the right side of the MMU, which is the default configuration.
(Not recommended) Strain-relief without straightener feature. This one can swivel, putting undo rotational stress on the cable, but it can also be used if your FINDA cable is routed around the LEFT side of the MMU.
This model is compatible with my MMU3 Dust Cover and MMU3 Dust Cover with Sliding Selector Cover.
Here's a link to this model on OnShape:
https://cad.onshape.com/documents/484320de6cfe4f14ecf7953c/w/d22c976cbb7cba705742e6d7/e/091cad61d3366acd7240ab10?renderMode=0&uiState=69fb6a757ce38d7c47309083