Top tether hooks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hook for isofix top tether for connecting various accessories
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This is a hook that can be connected to the top tether mount. It fits well in my nx4 Hyundai tucson.
There are 2 parts to the connector: a mount that clips on to the top tether rod and an accessory that holds whatever you want to secure and is connected to the mount. I've uploaded one for holding a med kit (this also require some 20mm velcro or other straps) and a hook for holding bags.
There are tho versions of the mount. The difference is that the center post in one is 9 mm and the other is 7. I used the longer one because I have seat covers that add a bit to the thickness.
I printed them in petg (will change to asa if petg doesn't behave) with the following settings:
nozzle: 0.4
layer height: 0.2
wall loops: 5
top/bottom layers: 3
sparse infill: 30% gyroid
supports: can be used but should also work without