Anti-Squeeze Baby Food Pouch Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sleeve that holds a standard baby food pouch. This lets infants drink from the pouch without crushing it.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 325
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Anti-Squeeze Baby Food Pouch Holder
A sleeve that holds a standard baby food pouch.
This lets infants drink from the pouch without crushing it. Less mess, less wasted food, and a more independent feeding experience.
Features
Fits standard baby food pouches (opening diameter = 10mm)
Holds pouch opening firmly in place (clips in). Quick insertion and removal.
Prevents over-squeezing and uncontrolled spillage
Easy to clean; no direct food contact (only the pouch touches the food)
Print Settings (recommended)
Material: PETG (preferred for durability and washability)
Orientation: Closed long side down.
Adult supervision required. This product is intended to be handed to an infant or toddler only under direct adult supervision. It is not a toy.
Inspect before every use. FDM-printed parts can develop cracks along layer lines. Check for damage, sharp edges, or loose fragments before each use. Discard if compromised. Broken pieces may pose a choking hazard.
No food contact intended. The holder is designed so that food only touches the original pouch, not the printed part. Do not eat from or pour food directly into the holder.
Print and material responsibility. You are responsible for choosing an appropriate filament and achieving sufficient print quality. PETG with adequate wall thickness is recommended. The author makes no claim regarding food-grade certification of any filament.
Cleaning. Hand-wash with warm water and mild soap before first use and after every use. FDM layer lines can trap residue and bacteria; clean thoroughly.
No warranty. This design is provided "as is", without any warranty of fitness for a particular purpose. The designer is not liable for any injury, damage, or loss resulting from printing or using this object.