TwisTable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Unique end table, created for the Prusa PrinTables design competition.
- Ocena
- 0 / 5
- Polubienia
- 55
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 543
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Share Alike
Introducing the TwisTable, my entry to the Prusa Print Tables design contest. The three piece base makes this possible to print on just about any printer, and all printed components print easily and support free.
Required components:
- Printed:
- 3x Base
- 3x Junction
- 3x Foot
- Hardware
- For supports: 3x 12" wooden dowels, 1" diameter
- For legs: 3x 24" wooden dowels, 1" diameter
- 1x Wooden tabletop, 22" diameter
- 30x #8 x ¾" Countersunk wood screws
- (Optional) Nonslip adhesive furniture pads, circular 1" diameter
The length of the legs and the size and shape of the tabletop are up to you and depend on what you're using the table for, though I wouldn't take the legs much longer than 24" and the tabletop should stay between 18" and 24". I cut my legs to 23" for a tabletop that sits roughly 22 ½" off the ground.
I printed the pieces for mine in Prusament Galaxy Black PETG.
0.2mm layer height, 20% infill, 5 perimeters. I beefed up the infill and perimeters for extra strength, adjust yours based on your own needs.
DISCLAIMER: THIS TABLE WAS NOT DESIGNED TO SUPPORT HUMAN WEIGHT. THE STRENGTH OF 3D PRINTED PARTS IS ENTIRELY DEPENDENT ON THE MATERIAL USED AND SETTINGS OF THE PRINTER. DO NOT ATTEMPT TO STAND/SIT ON THE TABLE.