Water tanks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
water tanks
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
i made those so top tank has outlet on the buttom giving pressure from being higher then sink in my washing station (i was too broke to buy a pump) then sink has pipe for bottom tank that has angled inlet so it doesnt make a lot of noice
i used 6mm pipes but there is chance it exported 4mm instead tube should be able to just stretch and if its really 4mm then i recommend using clamps on 6mm pipes if doesnt hold well
there is modifier to make base stronger compared to top so it doesnt explode from water but it still might leak if it has holes between layers so i recommend multiple walls and possibly using tape or something inside
do note i have not printed this yet i just used base physics