1 / 4
Polaroid and Photo Strip Frames w/ Wall Mounts — zdjęcie 1
1 / 4

Polaroid and Photo Strip Frames w/ Wall Mounts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3 Sizes of frames for polaroids and photo booth strips, with a nail hole for hanging. They also stand up on their own.

Ocena
0 / 5
Polubienia
4
Pobrania
15
Wydruki
0
Wyświetlenia
79
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Wall-mounted
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Frames for polaroids and photobooth strips with wall mounts. Rough dimensions of the photos that fit are 3.4" x 2.1" (Fujifilm Instax Mini), 4.2" x 3.5"(Classic Polaroid), and 6" x 2" (photobooth style strip).

I measured the photos with callipers and added tolerance when modeling. There is some extra space in the frames due to the slots for the photo to sit in on the frame edges.

I recommend printing with Silk or Matte PLA with tree supports only on the build plate. This will support the opening at the top for sliding the photos in and nothing else. The slots along the side and bottom have a 30° angle, so they will print without supports. This orientation gives the best finish on the frames imo.

I had issues with bead adhesion when trying to print them standing up (elagoo CC1), but rafts may help mitigate this if you want to print them off in large batches or w/o supports.

Cameras and Film 

Polaroid Sprint 600CL - 600 Film
Fujifilm Instax Mini 12 - Mini Film

Filament Companies that Support Me

SUNLU: PLA/PETG/TPU
Cookiecad: PLA/PETG/TPU/ABS/Silk PLA

Included links are Amazon Affiliate links. If you choose to purchase through these, they will support my projects at no cost to you.

Tagi