BW Loader
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An open source ejection port loader.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 430
- Wydruki
- 1
- Wyświetlenia
- 1454
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model was designed with pretty narrow clearances. If you find that your loaders are binding inside your upper, you may need to do some sanding, or recalibrate your extruder and flow rate for better dimensional accuracy. If all else fails, you can use Horizontal Expansion in the slicer to force your dimensions in line. This is an excellent candidate for variable layer heights. This model is printed without support and contains some very steep overhangs, so thin layers in those areas along with excellent part cooling will go a long way toward preventing drooping.
Material: eSun PLA+ (Other filaments should be perfectly fine as well. Ex: PETG for heat resistance)
Layer Height: 0.2mm (Variable between 0.16mm and 0.24mm recommended)
Shells: 3
Line Width: 0.5mm
Infill: 20%
Support: None
Fan Speed: 100%