Japanese Art, Sakura Coaster Set

Thank you for downloading my works. If you would like to sell my designs, past and future, a commercial license can be obtained from my MakerWorld or Patreon page.

This elegant set of coasters features intricate designs inspired by antique Japanese art, primarily using a striking monochrome palette accented with vibrant red. The collection showcases various traditional motifs, including the iconic Sakura (cherry blossoms) and the rising sun. This is a perfect set to showcase your drinks.

 Pictures shown are printed in an 0.4mm Nozzle

Note: I use height modifiers to make the print faster. If you are to use a different profile, make sure the coloring layers match up.

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
Filaments Used:
    PLA BambuLab Basic Black  Transmission Distance: 0.6
    PLA BambuLab Basic Jade White  Transmission Distance: 4.6
    PLA BambuLab Basic Red  Transmission Distance: 4
This print uses 3 unique filaments 

Swap Instructions:
    Start with Black
    At layer (2.84mm) swap to Jade White
    At layer (3.16mm) swap to Red.
    At layer (3.48mm) swap to Black for the rest. 

To double as a decor or wall art, scale these up to have a circular, already framed piece of art by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away.  

If you want more designed coasters, head over to my coaster collection

Link to my coaster collection.

 

More prints: Bookmarks -- Portraits -- Coasters -- Clocks -- Puzzles -- Display Stands -- Display Frames

They are sorted and can be found in my Collections - https://makerworld.com/en/@3djd/collections