Knipex Cobra 8701250 Jaws Covers (TPU)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
There are quite a few jaw covers for Knipex Cobra 87 01 250 on thingiverse, printables and makerword already...
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 208
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
There are quite a few jaw covers for Knipex Cobra 87 01 250 on thingiverse, printables and makerword already. I printed about 5 different models, but was not satisfied -- they were too lose in different ways. May be Knipex slightly changing the pliers over time or something was not right with these models or these models were just not compatible with my well calibrated printer :)
So I made my own model from the scratch that looks similar to the one from makerword.
The model is designed to be printed from TPU, it will not work if you print it from PLA/PETG/etc.
The fit is tight. If it is too tight for you -- scale it up in slicer.
I printed covers from Sunlu TPU 95a using the following settings:
Layer height: 0.2mm;
Line width: 0.55mm (wider line is better for layer's adhesion);
No supports;
Seam position: random;
Use outer brim if you have bed adhesion issue;
(optional) Fuzzy skin: Contour, Displacement + Extrusuion, Classic, Distance 0.1mm, thickness 0.1mm. The fuzzy skin looks cool and is rugged so I believe it should have slightly better grip.
Orca Slicer 3mf project file with settings I used for printing the model is included.